|
View Enquiry Basket
Automobile
| Engaged in manufacturing car care products and chemicals for effective maintenance (both functional and asthetic) of cars. Easy to apply products in aerosol cans, help in maintaining the cars always in show room condition. |
 
|
|
Battery Coat CVC BATTERY COAT (Battery Terminal Protector)
BATTERY COAT is an Anti-tracking Dielectric Sealant for Insulators. BATTERY COAT is based on the latest Silicone technology to provide instant insulation to electrical & electronic systems. When sprayed, it leaves a thin, hard, transparent, dielectric, water repellant, protective film on any surface.
| CHARACTERISTICS | TYPICAL VALUES | | 1. Appearance | Clear transparent | | 2. Specific gravity @ 25°C | 1.02 | | 3. Viscosity @ 25°C | 10-15 CST | | 4. Drying time | 1-2 hours at room temperature 30 minutes @ 70°C | | 5. Dielectric Strength | 7.5 KV | | 6. Coverage | 10 Sq.cm/gm |
AREA OF APPLICATIONS: PCBs and other Electrical & Electronic parts, Ignition systems. It can also be used for Induction coils, EHT Transformers & windings, Terminal blocks, Cables, Connections, Aerials, Switch-gear junction boxes and Starter Terminals, Mould Release, Battery Terminals, Insulators Bushings.
METHOD OF APPLICATION: To be sprayed in to and from manner
15-20cm. away from the surface.
BENEFITS:
• A Dielectric Coating.
• Water Repellent.
• Prevents Flashover & Corona Discharge.
• Mould Release Agent.
PACKING: 550-ml.Aerosol tin
 |
Add to Enquiry Basket  
|
|
Carburettor Cleaner CVC CARBURETTOR CLEANER (Spray Cleaner for Carburettors)
This is a high quality, specially formulated cleaner in spray form for removing the gummy & carbon deposit from the fine passages of carburettor jets.
| CHARACTERISTICS | TYPICAL VALUES | | 1. Appearance | Clear | | 2. Colour | Dark Brown | | 3. Flash Point °C, (ABEL) | Below 10 | | 4. Kinematic Viscosity @ 40°C, cst | 2.54 | | 5. pH value | 6-May | | 6. Copper Strip Corrosion for at 100°C/3hrs | ASTM1a | | 7. Density @15°C, gm/ml. | 0.877 | | 8. Shelf Life | 1 Year |
APPLICATION: Cleans metal surfaces (eg. Carburettor housing, etc.) from grease, dirt and oil. It helps to restore and pep power in engines. Reduces residue in the cylinder and valve area.
BENEFITS:
• Removes varnish, gums and carbon deposits from fuel system, carburettor, valves, rings and combustion chamber.
• Improves fuel economy by 10%
• Improves engine efficiency
• Does not harm catalytic efficiency
• Suitable for both leaded and unleaded petrol
• Protects against corrosion due to a specially added rust protector
PACKING: 250-ml. Aerosol Tin.
|
Add to Enquiry Basket
|
|
Shotgun+ CVC SHOTGUN + (Cleaner-cum-Polisher)
SHOTGUN is specially formulated Cleaner-cum Polish with anti-static properties for long term protection against moisture. It is suitable for all types of Plastics, Leathers, Ceramics, Chromium and Steel surfaces. It is also suitable for TV and Video cabinets, Computer controls, car upholstery & domestic appliances. It cleans away dirt, stains, greasy deposits, etc. from the surface & protects them from moisture & corrosion.
| CHARACTERISTICS | ;TYPICAL VALUES | | 1. Appearance | Clear | | 2. Colour … | Colourless | | 3. Copper Strip-Corrosion … | ASTM 1b / 2a @ 100°C/Hrs. | | 4. Flash Point °C, (ABEL) … | Below 10 | | 5. Specific Gravity @ R.T. (32°C) … | 1.055 | | 6. I.B.P. °C … | 73 | | 7. 90% Recovery @ °C … | 83 | | 8. Maximum Temp. Attained, °C … | 290 | | 9. Rec @ Max. Temp. % Vol. … | 88 | | 10. Resduie % Vol. … | 11 |
AREA OF APPLICATIONS: Automobiles dash boards, Bumpers, Leather upholstry, Computers, Monitors, Key boards, T.V., Office equipments, Telephones, Mobile phones, C.D. Players, Metal & plastic parts, Chrome parts, Car audios, White goods, Refrigerator, Washing Machine, Domestic Mixers, Motor Cycles, Door handles, etc. All Household, Office, Garage, Hotel, Workshop applications.
BENEFITS:* Leaves shiny & glossy film on any surfaces.
• Cleans smudges & stains.
• Protects from moisture & tarnish.
• Prevents of dust accumulation.
PACKING: 100-ml.Aerosol can and 250-ml. Aerosol can.
|
Add to Enquiry Basket
|
|
Fuel Additives DFA - 561 is a concentrated high performance and multi functional diesel fuel additive. It enhances Fuel efficiency, better ignition quality and better extreme weather operation with much cleaner fuel system.
Packing: 1-Litre Bottle & 5-Litre Carboy. |
Add to Enquiry Basket
|
|
Synol Flusher CVC FLUSHER-E (Engine Oil Flush)
CVC FLUSHER-E is a highly effective additive for flushing used oil. It removes carbon and varnish deposits of the oxidized oil and other contaminants from the gear boxes and lubricating oil circulation systems, pipelines and tanks.
| CHARACTERESTICS | TYPICAL VALUES | | 1. Appearance | Clear | | 2. Colour (visual) | Brown | | 3. Density @ 15°C. gm./ ml. | 0.8513 | | 4. Flash Point °C (COC) | 178 | | 5. Kinematic Viscosity @ 40°C, cst | 48 |
APPLICATION:
It is normally used for internal cleaning and flushing of gear boxes of equipments & components, which are subsequently lubricated with fresh lubricating oils, especially when synthetic oil is charged afresh.
BENEFITS:
• Removes carbon and varnish deposits
• Cleans gears, bearings, chains, pipelines, tanks and
machinery components which are lubricated by oil circulation systems.
DOSAGE:
• For flushing purpose, we recommend 1 litre for every 10 litres of used oil
in the gear box or sump (tank)
INSTRUCTION FOR USE:
• Mix FLUSHER-E as per the above dosage, in the gear box /tank containing used oil.
• Run the gear box / circulation system for about 1 hour at idle / low speed conditions
and then stop the gear box and drain the used oil completely
PACKING: 25-litre drum and 200-litre drum
SHELF LIFE: 2 years
|
Add to Enquiry Basket
|
|
Polylube (x) CVC POLYLUBE (X) (Engine Oil Additive)
It is a colloidal dispersion of solid lubricants in a very high grade synthetic lubricating oil blended with anti-oxidant & dispersant additives. To all lubricants it can be used as
1) a friction reducing agent 2) an E.P(extreme-pressure) and anti-wear additive
3) an assembly compound.
| CHARACTERISTICS | TYPICAL VALUES | | 1. Appearance/Colour (visual) | Clear / Dark Brown | | 2. Density @15°C. gm/ml. | 0.9 | | 3. Flash Point °C (COC) | 200 | | 4. Kinematic Viscosity @ 40°C,cst | 250 | | 5. Temperature range °C | -40 to 250 |
DOSAGE as an additive to lubricating oils for :-
1. Internal Combustion Engines,
Air Compressors & Industrial lubricants … 5% of POLYLUBE (X)
N.B. CVC POLYLUBE (X) Additive should be preferably pre-mixed with oil prior to putting into the machine for operations.
AREA OF APPLICATIONS : As an additive to all Industrial & Automotive engine oils.
BENEFITS:
• Extends engine life.
• Extends re-lubrication interval
• Reduces wear and friction.
• Help stop oil foaming for better lubrication.
• Protects against oil film break down
BULK PACKING: 1-litre bottle, 25-litre Drum.
CUSTOMIZED PACKING: From 100-ml. to 500-ml. as per customer requirement
SHELF LIFE: 2 years
|
Add to Enquiry Basket
|
|
CVC Brake Cleaner High performance Cleaner / Degreaser.
Applications: Brake Liners, Disc and Drum Brakes.
Benefits:
Removes greasy/oily dirty deposits from brake cables / brake liners etc. effectively.Environmentally safe.
Packing: 550-ml. Aerosol Tin. |
Add to Enquiry Basket
|
|
Antifreeze Coolants CVC ANTIFREEZE COOLANT maintains optimum radiator temperature even under the most extreme conditions. Under cold temperatures, it prevents freezing of water and in extremely hot environment, it prevents evaporation loss of water thereby maximizing the cooling efficiency. It is non-corrosive and keeps the water channels clean and free from deposits maintaining effective heat transfer. It is ideal for all seasons and for all vehicles.
It may be used neat or diluted with demineralised water for industrial cooling and heat transfer applications such as in radiators, boilers, chilling plants, cooling towers etc. It is an excellent Coolant for Automobiles, Trucks & Diesel Generators.
| CHARACTERISITCS | TYPICAL VALUES | | 1. Appearance | Green to Yellowish green | | 2. Odor | Mild | | 3. Specific Gravity | 1.01 | | 4. Refractive index @20°C | 1.432 | | 5. pH | 6.5 | | 6. Copper strip corrosion | ASTM 1a | | @100°C – | 3 hrs | | 7. Pour Point | Below –33°C | | 8. Additives | Anti-rust, Anti-corrosive, & Anti-oxidant |
Packing: 1-Litre bottle and 25-Litre drum, 200-litre drum.
|
Add to Enquiry Basket
|
Product Showcase
View all our products / services as a slide show.
Play Now
 
|
Copyright © Chem-Verse Consultants India Private Limited, All Rights Reserved (Terms of Use)
